Pro Tint Kit
The Pro Tint Kit has everything you need to achieve bold brows for your clients. The Brow Tint is a richly pigmented, vegan formula in a luxe range of shades. The brow tints leave a slight stain on the skin for up to one week and lasts on the brow hairs for four to six weeks.
- Design & Define Gold Wax 1kg
- Black Tint
- Brown Tint
- Light Brown
- Graphite Tint
- Peroxide Creme 100ml 3%
- Tint Remover 150ml
- Brush 122 18k Define & Line Brush
- Gold Tweezer Point Precision
- Gold Tweezer Slant Precision
- Gold Straight Trimming Scissor
- Mapping Thread 15m
- Glass Mixing Dish
- Brow Code Cosmetic Bag - Exclusive to the Pro Tint Kit
Important Note: You must hold a government accreditation to perform and use on client procedures. The rules and regulations for brow tinting vary from state to state - brow tinting may not be legal in your state. The legality of brow tinting falls under the jurisdiction of state and local cosmetology boards. Please check with your state and local cosmetology board to see if your state allows brow tinting.
Important Note: Complete a test patch prior to tinting.
Before Brow Tinting
Step #1 - Remove all eye makeup before tinting the eyebrows using our Micellar Remover.
Step # 2 - In order to achieve the optimum tinting results, the eyebrows should be dry and free of all oils and sebum as this can create a barrier against all Brow Code Tints and it will not adhere to the surface layer of the skin or the hair.
Preparation of Tint
Mix equal parts of Brow Tint and Cream Oxidant into a creamy paste using the enclosed application stick. The mixing ratio is 1:1 (Generally 4 drops of Cream or Liquid Oxidant is enough to make an even paste).
Step #1 - When the client has closed their eyes, apply the tint to the eyebrows using the application stick until they are completely covered in tint.
Step #2 - Ensure the tint is directly placed in the shape you are wanting to achieve as it can slightly stain the skin.
Step #3 - Application times vary 5-12 minutes depending on the desired intensity and results. The longer you leave it, the darker it will become.
Cleansing the Brows
Step #1 - At the end of application time, remove excess tint with a dry cotton ball. Then proceed to remove excess tint in the areas that you want lighter by gently using the Micellar Water making sure no pigment is left outside of the brow. You can gently remove excess over the brow with the Micellar Water.
Step #2 - If the tint stains the skin in areas you want to remove, use the Brow Code Tint Remover quickly and gently. You must not use the Tint Remover directly on the eyelashes, eyebrows or on the skin around the eyes as this can cause serious irritation.
Using Brow Code Tint on Eyelashes
Important Note: Use the shades Black or Blue Black for tinting eyelashes.
Step #1 - Remove any contact lenses and remove two eye protection papers.
Step #2 - Put some skin protection cream on the customers lower lid and underside of the eye protection papers.
Step #3 - Press one of the eyelash protection papers right up under the eyelashes of each eye to ensure that no tint touches the skin.
Step #4 - Please use an application stick to apply the tint until lashes are covered.
Step #5 - Application times vary 5-12 minutes depending on the desired intensity and results.
Step #6 - After the application time, remove the eyelash protection papers carefully and remove access tint using a dry cotton ball.
Step #7 - Finally remove any remaining tint with Micellar Water and cotton wool. The client’s eyes should remain closed until cleansing has been completed.
There are a small number of individuals who show an allergic reaction to hair colours. In very rare cases this reaction may be severe. In order to reduce the risk of an allergic reaction it is important to carry out a skin sensitivity test. This skin sensitivity test must be carried out 48 hours before each new client application to ascertain if there is an allergy or sensitivity against the product or if such has emerged since the last application. In exceptional cases irritations can occur only after 72 hours. If you know that hypersensitivity could be on hand, leave the mixture for 72 hours on the skin.
Instructions: Mix 1cm of Brow Code Tint with 1 cm of Oxidant 3% Creame. Apply a small amount to a small area on the inner bend of the elbow or behind the ear. Allow to dry and leave uncovered for 48 to 72 hours, then clean thoroughly. If any irritation occurs during this time do not carry out the treatment.
For Professional Use Only
Product is not intended for use on persons under the age of 16. Temporary black henna tattoos may increase your risk of allergy. Eyelashes should not be coloured if the consumer has a rash on the face or sensitive irritated damaged scalp, has ever experienced any reaction after colouring hair or eyelashes hair, has experienced a reaction to a temporary black henna tattoo in the past. Rinse eyes immediately if product comes into contact with them. Wear suitable gloves. Brow Code Tints contains phenylendiamines (Toluylendiamines) (Resorcinol).
Design & Define Wax
Hydrogenated styrene/ Methyl styrene/indene copolymer, Hydrogenerated Microcrystalline Wax, Ethylene/VA Copolymer, Paraffin, Parfum, Paraffinum Liquidum, Mica, BHT, CI 19140, CI 77491, CI 77891.
Aqua, cetearyl alcohol, p-Phenylenediamine, sodium cetearyl sulfate, sodium laureth sulfate, resorcinol, m-Aminophenol, 2, 4-Diaminophenoxyethanol, CI 77499.
Aqua, cetearyl alcohol, 2, 4-Diaminophenoxyethanol, p-Phenylenediamine, sodium cetearyl sulfate, sodium laureth sulfate, C1 7707.
Aqua, cetearyl alcohol, p-Phenylenediamine, sodium cetearyl sulfate, sodium laureth sulfate, m-Aminopheno, 4-amino-2-hydroxytoluene, 2, 4-Diaminophenoxyethanol, CI 77499.
Aqua, cetearyl alcohol, p-Phenylenediamine, sodium cetearyl sulfate, sodium laureth sulfate, p-Aminophenol, CI 7749, CI 77491, CI 77492.
Aqua, cetearyl alcohol, p-Phenylenediamine, sodium cetearyl sulfate, sodium laureth sulfate, resorcinol, m-Aminophenol, p-Aminophenol, CI 7749, CI 77491, CI 77492.
Aqua, Hydrogen Peroxide, Ethanol, Cetearyl Alcohol, Sodium Lauryl Sulfate, Sodium Cetearyl Sulfate, Phosphoric Acid, Tetrasodium EDTA, Disodium Phosphate.
Aqua, Isopropyl Alcohol, Polysorbate 80, Citrus Limon Peel Oil, Limonene, Litsea Cubeba Fruit Oil, Citral, Linalool, Citronellol, Geraniol